Arduino Ethernet WITHOUT Poe View larger The picture may differ from the original

Arduino Ethernet WITHOUT Poe

A000068

New

Retired

39,90 €

Add to wishlist

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

A separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

Compatible with PoE Module 12V (X000002).

Technical specifications

MicrocontrollerATmega328
Operating Voltage5V
Input Voltage (recommended)7-12V
Input Voltage (limit)6-20V
Digital I/O Pins14
PWM Digital I/O Pins4
Analog Input Pins6
DC Current per I/O Pin40 mA
DC Current for 3.3V Pin50 mA
Flash Memory32 KB
Flash Memory for Bootloader0.5 KB
SRAM2 KB
EEPROM1 KB
Clock Speed16 MHz
Lenght68.6 mm
Width53.3 mm
Weight28 g

Arduino Ethernet Official Page

Tags

Related Products