Waterproof DS18B20 kit

INTRODUCTION

If you are familiar with our product, you will find there is waterproof temperature sensor named DS18B20. This waterproof temperature sensor kit is using the same probe——DS18B20 probe AS . It contains a probe with a resister module. So it is easy to connect on the Arduino board.

The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.

SPECIFICATION

    Operating voltage: 3.0~ 5.5V
    ±0.5°C Accuracy from -10°C to +85°C
    Usable temperature range: -55 to 125°C (-67°F to +257°F)
    9 to 12 bit selectable resolution
    Uses 1-Wire interface- requires only one digital pin for communication
    Unique 64 bit ID burned into chip
    Multiple sensors can share one pin
    Temperature-limit alarm system
    Query time is less than 750ms
    3 wires interface:
        Type A
            Red wire - VCC
            Black wire - GND
            Yellow wire - DATA
        Type B
            Red wire - VCC
            Yellow wire - GND
            Green wire - DATA
    Stainless steel tube 6mm diameter by 35mm(1.34") long
    Cable diameter: 4mm(0.16")
    Length: 90cm(35.43")

DOCUMENTS

SHIPPING LIST

    Waterproof DS18B20 Digital temperature sensor (DFR0198)  x1
    Terminal sensor adapter (DFR0055)  x1
    Digital sensor cable (FIT0011)