Deskontroller 32, Art-Net LED Controller View larger The picture may differ from the original

Deskontroller 32, Art-Net LED Controller



High performance Art-Net compliant LED controller capable of handle 32 universes or 16384 channels at 50 frames per second.

More details

In Stock
On Demand

1 100,00 €

Add to wishlist


- 32 output universes (16384 channels) at 50 frames per second.

- Solderless output wiring, using inexpensive standard RJ45 network cables.

- Each output line handles 2 x 4 universes (2 x 2048 channels).

- All combinations of RGB and RGBW color reorder.

- Support for standard and non standard DMX modes (at TTL levels).

- Art-Net address (Net-Subnet-Universe) configuration on steps of 32 universes.

- Supported synchronization modes: Madrix® Sync and Art-Net® Sync.

- All setup parameters needed to run are configured from DIP switches, except IP address and Art-Net NET.

- Integrated SPI Controller, you don't need any other converter for drive digital led pixels and digital LED strips.

12 VDC power adapter included. Connector available for EU, UK, US or AU.

Works with any software or console that supports the Art-Net protocol as MADRIX, Resolume, MadMapper, Lightjams, Enttec light mapper, Jinx, Mapio, and others.


deskontroller 32 is designed to handle 32 Art-Net universes with the highest level of performance, (50 frames per second, or 20 mS refresh time) for most types of LEDs.

Solderless output wiring

Now, output wiring it's easier than ever, thanks to use of standard RJ45 network cables (not included), and RJ45 to screw driver adapters (8 x included).

Universes are grouped on 4 universes blocks (2 x 4 universes on each output cable).


Supported modes Madrix® Sync and Art-Net® Sync.

We recommend its use when available, no configuration required, if your software sends Sync, deskontroller 32 detects it and activate for improved performance.

Configuration for Art-Net address (Net-Subnet-Universe)

It allows configuration on 32 universes steps.

You can select 7 different start addresses from DIP switches, and up to 1024 start addresses using NET (only for Art-Net III.)

Color order

deskontroller 32 supports pixels and strips with 1, 3 or 4 channels per pixel (White, RGB or 3 whites, and RGBW)

For leds with different color order, you can select any RGB or RGBW order from DIP switches.

Led drivers

More than 60 chipsets are supported, all selected from DIP switches.

APA102, SK9822


D705, D707, D708

DMX512 TTL levels, DMX500K TTL levels, DMX750K TTL levels, DMX1000K TTL levels, DMX1250K TTL levels, DMX1500K TTL levels, DMX2000K TTL levels, DMX2500K TTL levels

INK1002, INK1003


LPD1886, LPD1882, LPD6803, LPD6813, LPD1101, LPD8803, LPD8806


P9813, P9816


SM16703, SM16726

TM1803, TM1809, TM1812, TM1814, TM1829, TM1903, TM1926

UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B , UCS2903, UCS2903S, UCS2909, UCS2912, UCS3903, UCS8903, UCS5903, UCS6909, UCS6912, UCS7009

WS2811, WS2812, NEOPIXEL, WS2812B, WS2812S, WS2813, WS2801, WS2803, WS2813, WS2813A, WS2813B, WS2813C, WS2813D, WS2818,WS2821, WS2822



Related Products