Este producto está disponible. Puedes hacer un pedido y lo recibirás acorde al método de envío.
Los productos Bajo Demanda los enviamos a nuestros clientes a través de un pedido.
Haz un pedido normal, nosotros lo pediremos a nuestros proveedores y te lo enviaremos en un solo envío para ahorrar costes.
Actualmente no tenemos stock pero recibiremos pronto. Puedes comprar y haremos el envío tan pronto vuelva a estar disponible (de 1 a 3 semanas).
Pedidos que incluyen productos Bajo Demanda o Back Order serán eviados cuando vuelvan a estar disponibles. Esto significa que el pedido tardará de 1 a 3 semanas en ser enviado una vez el pedido esté hecho y pagado.rnSi deseas recibir primero los productos que si están en stock, por favor realiza dos pedidos diferentes separando los productos en stock, bajo demanda o back order.
Este producto solo está disponible para búsqueda (tutoriales, esquemas...). No pueden ser comprados.
EC041893
Nuevo
Advertencia: ¡Últimos artículos en inventario!
Disponible el: 0000-00-00
40Hz Ultrasonic Range Detection Sensor
Recipiente :
* Campos obligatorios
total Cancelar
1、Specification:
Working Voltage : 5V(DC)
Working Current : max 15 ma
Working frequency : 40HZ
Output Signal : 0-5V (Output high when obstacle in range)
Sentry Angle : max 15 degree
Sentry Distance : 2cm - 500cm
High-accuracy : 0.3cm
Input trigger signal : 10us TTL impulse
Echo signal : output TTL PWL signal
Size : 45*20*15mm
2、Interface:
Pin :
1:VCC ; 2:trig(T);3:echo(R);4:OUT ( Don't Connect ) ; 5:GND
3、Usage:
Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not.
The out pin of this module is used as a switching output when anti-theft module, and without the feet when ranging modules.
Note : the module should be inserted in the circuit before been power, which avoid producing high level of misoperation ;if not, then power again.
4、Module Working Principle :
(1) Adopt IO trigger through supplying at least 10us sequence of high level signal,
(2) The module automatically send eight 40khz square wave and automatically detect whether receive the returning pulse signal,
(3) If there is signals returning, through outputting high level and the time of high level continuing is the time of that from the ultrasonic transmitting to receiving.
Test distance = (high level time * sound velocity (340M/S) / 2,
5、Advantage :
Simple,easy to adopt in system;Beam angle to avoid disruptions;Endurable
CORZOTECH - EASY LIFE FOR INTERACTION