Este producto está disponible. Puedes hacer un pedido y lo recibirás acorde al método de envío.
Los productos Bajo Demanda los enviamos a nuestros clientes a través de un pedido.
Haz un pedido normal, nosotros lo pediremos a nuestros proveedores y te lo enviaremos en un solo envío para ahorrar costes.
Actualmente no tenemos stock pero recibiremos pronto. Puedes comprar y haremos el envío tan pronto vuelva a estar disponible (de 1 a 3 semanas).
Pedidos que incluyen productos Bajo Demanda o Back Order serán eviados cuando vuelvan a estar disponibles. Esto significa que el pedido tardará de 1 a 3 semanas en ser enviado una vez el pedido esté hecho y pagado.rnSi deseas recibir primero los productos que si están en stock, por favor realiza dos pedidos diferentes separando los productos en stock, bajo demanda o back order.
Este producto solo está disponible para búsqueda (tutoriales, esquemas...). No pueden ser comprados.
EC042235
Nuevo
Advertencia: ¡Últimos artículos en inventario!
Disponible el: 0000-00-00
RTC DS1307 Reloj
Recipiente :
* Campos obligatorios
total Cancelar
RTC DS1307 Clock can be used to have an independent Clock to feed arduino with time.
DS1307 is a real-time chip of DALLAS company,which adopt I2C protocal to communicate with SCM, and there was this kind interface on Arduino, therefore is very convenient to link with each other. DS1307 have a programmable waveforms output, it can be used to drive LED lights, or trigger a certain event as a break off, but be careful when you use it to take some kind of high power module. We design the real clock module to pin out the I2C interface of Ds1307 and programmable waveforms output interface SQW are connected, but usually we will only use the I2C interface to realize basic set the clock/read function. Note, this module must be installed on the battery can work normally. The battery is button batteries (type CR1220), the positive upward.
You can connect it to arduino using the Arduino Sensor Shield not included.
Download the DS1307 Library 1 or Library 2
then uncompress DS1307 Library 1 or Library 2 into libraries of Arduino and restart ;
Testing Code :
#include <WProgram.h> #include <Wire.h> #include <DS1307.h> // written by mattt on the Arduino forum and modified by D. Sjunnesson void setup() { Serial.begin(9600); RTC.stop(); RTC.set(DS1307_SEC,1); //set the seconds RTC.set(DS1307_MIN,23); //set the minutes RTC.set(DS1307_HR,12); //set the hours RTC.set(DS1307_DOW,4); //set the day of the week RTC.set(DS1307_DATE,15); //set the date RTC.set(DS1307_MTH,7); //set the month RTC.set(DS1307_YR,10); //set the year RTC.start(); } void loop() { Serial.print(RTC.get(DS1307_HR,true)); //read the hour and also update all the values( true) Serial.print(":"); Serial.print(RTC.get(DS1307_MIN,false));//read minutes without update (false) Serial.print(":"); Serial.print(RTC.get(DS1307_SEC,false));//read seconds Serial.print(" "); // some space for a more happy life Serial.print(RTC.get(DS1307_DATE,false));//read date Serial.print("/"); Serial.print(RTC.get(DS1307_MTH,false));//read month Serial.print("/"); Serial.print(RTC.get(DS1307_YR,false)); //read year Serial.println(); delay(1000); }
CORZOTECH - EASY LIFE FOR INTERACTION